Interactive Rooftop Simulator & Blueprint

How Many Solar Panels Do I Need? Panel Count Calculator Number of Solar Panels Calculator for Indian Homes

Calculate exactly how many solar panels you need for your home in India based on your monthly electricity bill, units consumed, or available roof dimensions. Sized with state DISCOM tariffs, peak sun hours, and PM Surya Ghar subsidies.

Calculation Mode
₹
₹500/mo ₹10,000/mo ₹25,000/mo
units
50 units (1 BHK) 400 units (3 BHK) 1,200+ units (ACs)
kW
1 kW 3 kW (Most Popular) 10 kW
ft
ft
kW
₹ /unit
Average DISCOM rate: ₹/unit Sun Hours: PSH
100% Usable Terrace

Solar Panel Layout & Sizing Engine

NASA PSH Data & DISCOM Tariff Engine

%
1. Rooftop Dimensions & Module Wattage Analyzed
2. Physical Aspect Ratio & Matrix Grid Sized
3. Shadow-Free Spacing & Dead Load Verified
4. Visual Array Layout & Generation Output Ready

Rooftop Panel Layout & Sizing Blueprint

Select your calculation mode on the left and click "Calculate Panel Count & Layout" to simulate your custom 2D rooftop solar array.

Exact Module Count

440W, 540W & 580W TOPCon high-efficiency modules.

Shadow Clearance

1.25x inter-row pitch and 2.5 ft perimeter maintenance walkways.

Dead Load Check

IS 456 standard RCC slab verification (~15-18 kg/m²).

PM Surya Ghar

Full DBT subsidy calculation up to ₹78,000 + state top-up.

Engineering Assumptions & Standards Data updated: 18 Nov 2026
  • Roof area requirement assumes 100 sq ft of shadow-free area per kW, incorporating inter-row shadow pitch and 2.5 ft perimeter access walkways.
  • Panel weight is calculated at 25 kg per framed module, exerting approximately 15 to 20 kg/m² dead load on the roof, safely within standard Indian RCC slab structural limits.
  • Monthly generation is modeled on state-specific Peak Sun Hours (PSH) calibrated with MNRE irradiance data at a standard 78% system performance ratio.
  • Subsidies reflect current PM Surya Ghar Muft Bijli Yojana guidelines: ₹30,000/kW up to 2 kW, ₹18,000 for the 3rd kW, with a maximum central subsidy of ₹78,000.

Panels Needed by Monthly Bill

Standard residential sizing table based on benchmark 540W modules, 440W modules, and 580W high-power modules calibrated with national average tariffs.

Monthly bill Monthly Units System Size Panels (540W) Panels (440W) Panels (580W) Roof area PM Surya Ghar Subsidy Monthly Savings
₹1,500 214 units 2 kW 4 5 4 200 sq ft ₹60,000 ₹1,540
₹2,500 357 units 3.5 kW 7 8 7 350 sq ft ₹78,000 ₹2,695
₹4,000 571 units 5.5 kW 11 13 10 550 sq ft ₹78,000 ₹4,235
₹6,000 857 units 8 kW 15 19 14 800 sq ft ₹78,000 ₹6,160
₹8,000 1143 units 10 kW 19 23 18 1,000 sq ft ₹78,000 ₹7,700
₹12,000 1714 units 10 kW 19 23 18 1,000 sq ft ₹78,000 ₹7,700

Based on national-average tariff and sun hours. Select your state above for exact figures.

State-Wise Solar Generation and Panel Requirements Across India

Solar generation varies across Indian climatic zones due to latitude and solar irradiance. Here is the output for a benchmark 3 kW residential system across top solar states:

State / Union Territory Sun Hours (PSH) Avg DISCOM Tariff 3kW Panel Count (540W) Monthly Generation Monthly Bill Savings State Top-Up Support
Gujarat 5.22 hrs/day ₹5.8/unit 6 panels 366 units ₹2,123 Surya Gujarat Yojana
Maharashtra 4.82 hrs/day ₹8.8/unit 6 panels 338 units ₹2,974 Central Subsidy Only
Rajasthan 5.41 hrs/day ₹7.1/unit 6 panels 380 units ₹2,698 Mukhyamantri Nishulk Bijli Yojana Solar Top-Up
Uttar Pradesh 4.86 hrs/day ₹7.2/unit 6 panels 341 units ₹2,455 UP State Solar Policy Top-Up Subsidy (UPNEDA)
Karnataka 4.91 hrs/day ₹7.4/unit 6 panels 345 units ₹2,553 Central Subsidy Only
Tamil Nadu 4.86 hrs/day ₹6.5/unit 6 panels 341 units ₹2,217 Tamil Nadu State Solar Top-Up Scheme (TNGECL / TEDA)
Delhi 4.75 hrs/day ₹6.8/unit 6 panels 333 units ₹2,264 Delhi Solar Policy 2024–2027 (Capital Subsidy + Gbi)
Kerala 4.90 hrs/day ₹7.6/unit 6 panels 344 units ₹2,614 Central Subsidy Only
Madhya Pradesh 5.50 hrs/day ₹6.7/unit 6 panels 386 units ₹2,586 Central Subsidy Only
West Bengal 4.60 hrs/day ₹7.3/unit 6 panels 323 units ₹2,358 WBSEDCL State Rooftop Solar Top-Up Scheme

Solar Panel Brands and Cell Technologies in India (2026)

Comparison of top solar module manufacturers certified under the Approved List of Models and Manufacturers (ALMM) in India:

Manufacturer Brand Model Wattage Cell Technology Module Efficiency Tier-1 Rating Approx. Price / Panel
Adani Solar 545W TOPCon 545W TOPCon 21.2% Tier-1 ₹13,800
Panasonic 545W TOPCon 545W TOPCon 21.4% Tier-1 ₹14,500
Tata Power Solar 535W Mono PERC 535W PERC 20.7% Tier-1 ₹13,500
Vikram Solar 540W Mono PERC 540W PERC 20.8% Tier-1 ₹12,200
Waaree 540W Mono PERC 540W PERC 20.9% Tier-1 ₹12,000
Goldi Solar 550W TOPCon 550W TOPCon 21.3% ALMM Approved ₹12,800
Luminous 540W Mono PERC 540W PERC 20.5% ALMM Approved ₹13,000
RenewSys 545W Mono PERC 545W PERC 20.9% ALMM Approved ₹11,800
Saatvik 540W Mono PERC 540W PERC 20.6% ALMM Approved ₹11,500

How to Calculate How Many Solar Panels You Need: The Complete Engineering Guide

Authored by Technical Research Team · Reviewed against MNRE Technical Guidelines and Bureau of Indian Standards (IS 456 / IS 875) · Updated September 2026

1. The Exact Mathematical Formula for Solar Panel Sizing

Solar panel calculation is not a guessing game. It is determined by your household's actual electrical consumption, the average daily sunlight available at your latitude, and the wattage of modern photovoltaic modules. Professional solar engineers in India follow this 5-step method:

Core Sizing Equations

Step A: Daily Energy Requirement
Daily Units (kWh) = Monthly Electricity Units Consumed ÷ 30 days

Step B: Required System Capacity (kW)
System kW = Daily Units ÷ (Peak Sun Hours × System Performance Ratio)

Step C: Number of Panels Needed
Panel Count = (System kW × 1,000 Watts) ÷ Rated Wattage per Panel

In India, solar irradiance yields between 4.2 and 5.5 Peak Sun Hours (PSH) per day depending on whether you are located in northern, central, western, or southern states. System Performance Ratio (PR) is standardly calibrated at 0.78 (78%), which accounts for real-world environmental factors including high ambient summer temperatures, dust accumulation on glass, inverter conversion efficiency (typically 97%), and DC/AC cabling resistance.

For example, if your home in Maharashtra or Gujarat consumes 360 units per month:

  • Daily consumption = 360 ÷ 30 = 12 units (kWh/day).
  • Required DC system size = 12 ÷ (4.8 PSH × 0.78 PR) = 3.20 kW.
  • Recommended system size rounded to the nearest standard inverter rating = 3.0 kW to 3.3 kW.
  • Number of 540W Mono PERC panels needed = 3,200W ÷ 540W = 5.92, rounded up to 6 panels.

2. Choosing Between 440W, 540W, and 580W Solar Modules

Until 2021, Indian residential installations primarily used 330W polycrystalline panels. Today, the Indian market has decisively shifted to high-output half-cut Monocrystalline PERC and N-Type TOPCon modules ranging from 535W to 580W.

440W–450W Modules

Dimensions: 1.95m × 1.04m (approx 21 sq ft). Best suited for small or complex roofs with narrow spaces and multiple obstructions.

540W–550W Modules (Standard)

Dimensions: 2.27m × 1.13m (approx 27.5 sq ft). The undisputed industry standard in India. Offers the lowest balance-of-system cost per watt.

580W+ TOPCon Modules

Dimensions: 2.38m × 1.13m (approx 29 sq ft). Next-generation N-Type technology delivering higher generation during peak summer heat.

Choosing higher-wattage modules reduces the total number of mounting brackets, aluminum rails, mid-clamps, end-clamps, and rooftop penetrations. For a 3kW system, choosing 540W modules requires only 6 panels, whereas older 330W panels would have required 9 to 10 panels, significantly increasing structural hardware and installation labor.

3. Shadow-Free Roof Space & Inter-Row Pitch Clearance

A common misconception among homeowners is assuming that their entire terrace area can be covered with solar panels. In reality, you must distinguish between gross roof area and usable shadow-free roof area:

  • The 100 Sq Ft Rule: In India, each 1 kW of rooftop solar requires approximately 90 to 100 square feet of shadow-free area on flat reinforced concrete (RCC) terraces. For a standard 3 kW system, you need roughly 300 square feet of unobstructed space.
  • Row-to-Row Inter-Pitch Spacing: Solar panels in India are installed with a southern tilt of 15° to 25° (matching your city's latitude) to maximize year-round solar capture. Because tilted panels cast a northern shadow behind them, consecutive rows must be separated by 0.8 to 1.2 meters. Placing rows too close together causes self-shading during low-angle winter months, drastically reducing power generation.
  • Mandatory Maintenance Walkways: Indian dust conditions necessitate cleaning panels every 10 to 15 days with water. Quality solar installations always leave a 2.5 to 3-foot perimeter corridor along parapet walls and between module tables to provide safe technician access without walking on glass.

4. Can Your Roof Bear the Weight? Structural Dead Load Analysis

One of the most frequent questions from homeowners is whether placing heavy solar panels and mounting structures will damage their roof slab.

A standard 540W framed glass panel weighs approximately 25 to 27 kg. For a 3 kW system consisting of 6 panels, the total module weight is about 150 to 160 kg. When you add hot-dip galvanized mounting structures and concrete ballast blocks, the total system weight is roughly 250 to 300 kg distributed across 300 square feet.

Structural Safety Benchmark (IS 456 Standards):

Standard residential reinforced cement concrete (RCC) roofs in India are engineered to support a minimum live load of 150 to 200 kg per square meter (approx 15 to 20 kg/sq ft). A rooftop solar installation exerts a dead load of only 15 to 20 kg per square meter (1.5 to 2.0 kg/sq ft). This means rooftop solar consumes less than 12% of the slab's rated structural load capacity, making it completely safe for sound residential buildings.

5. Solar Panel Capacity Guide for Indian Households

1 BHK Flat / Small Independent House (1 kW to 2 kW)

Typical Consumption: 100–180 units/month. Appliance mix: LED lights, ceiling fans, television, refrigerator, and 0.5 HP water pump. Panels needed: 2 to 4 modules (540W). Roof space required: 100–200 sq ft.

2 BHK to 3 BHK Home (3 kW — Most Popular)

Typical Consumption: 250–400 units/month. Appliance mix: All basic appliances plus one 1.5-ton 5-star inverter AC and washing machine. Panels needed: 6 modules (540W). Roof space required: 300 sq ft. Receives the full maximum central subsidy of ₹78,000 under PM Surya Ghar.

3 BHK to 4 BHK Home with 2 Air Conditioners (5 kW)

Typical Consumption: 500–700 units/month. Appliance mix: Multiple inverter ACs, induction cooker, microwave, microwave oven, and water geysers. Panels needed: 9 to 10 modules (540W). Roof space required: 500 sq ft.

Large Villa / Joint Family Bungalow with EV (8 kW to 10 kW)

Typical Consumption: 900–1,500 units/month. Appliance mix: 3+ air conditioners, electric vehicle home charger, dishwasher, heat pump water heater. Panels needed: 15 to 19 modules (540W). Roof space required: 800–1,000 sq ft.

6. PM Surya Ghar Subsidy and Net Metering in India

The Government of India launched the PM Surya Ghar Muft Bijli Yojana to provide direct financial assistance for residential rooftop installations. The central subsidy structure is defined as:

  • 1 kW System: ₹30,000 central subsidy.
  • 2 kW System: ₹60,000 central subsidy.
  • 3 kW and above: ₹78,000 flat central subsidy cap.

Several state governments provide additional top-up incentives. For example, Assam provides up to ₹45,000 in additional state support, Uttar Pradesh offers up to ₹30,000, and Delhi provides generation-based solar incentives. You can verify and apply directly through the official National Portal (pmsuryaghar.gov.in) and the Ministry of New and Renewable Energy (mnre.gov.in).

Continue planning

Solar Panel Cost Calculator

Full price and subsidy breakdown.

Calculate Now

Rooftop Load Calculator

Check if your roof can bear the weight.

Calculate Now

Solar Panel Price List

Compare panel brands and prices.

Calculate Now
Regional Solar Hubs

Explore Rooftop Solar by State & City

Calibrated with state Discom tariffs, local net-metering policies, and PM Surya Ghar subsidies across India.

Frequently asked questions

How many solar panels do I need for a 3kW system?

With standard 540W panels, a 3kW system needs 6 panels (3000W ÷ 540W, rounded up). With smaller 440W panels, you'd need 7 panels for the same capacity.

Does panel wattage affect how many panels I need?

Yes — higher-wattage panels (580W) need fewer units for the same total system size than lower-wattage panels (440W), though the total roof area required stays roughly similar since higher-watt panels are typically also physically larger.

How much does a solar panel weigh?

A typical framed glass solar panel weighs 22–28 kg depending on size and wattage. For a 6-panel (3kW) system, budget roughly 150 kg total, not including the mounting structure and ballast.

Can I fit solar panels on a small roof?

A 1kW system needs only about 100 sq ft, so even compact homes usually have enough roof space for a meaningful system. Our Rooftop Load Calculator can confirm your roof can safely bear the weight.

Should I choose more, smaller panels or fewer, bigger panels?

For most homes, fewer high-wattage panels reduce the number of mounting points and wiring complexity, slightly lowering installation cost — but the difference in total system cost is usually small.

What's the difference between panel count and system size (kW)?

System size (kW) is the total capacity you need based on your electricity usage. Panel count is simply that capacity divided by each panel's wattage — the same kW size needs fewer panels if you choose a higher wattage.

What panel wattage is assumed in the module count calculation?

Calculations use standard 540W–550W Mono PERC and TOPCon modules, which represent 2026 industry standards in India. Higher wattage modules reduce mounting structures and save rooftop space.

What is tilt spacing and why is row-to-row clearance critical?

When solar panels are tilted towards the south, they cast a northern shadow behind them. Leaving 0.8 to 1.2 meters of row-to-row clearance prevents self-shading during low winter sun angles.

How do irregular roofs and obstructions impact panel layout?

Water tanks, parapet walls, and staircases cast shadows and reduce usable area. While 1 kW typically needs 100 sq ft, obstruction-heavy roofs may require 120–130 sq ft of gross space to position panels in clear sunlight.

Before you rely on this estimate

This calculator produces a planning range from your inputs and the assumptions shown on the page. It cannot replace a site visit, roof-shade survey, Discom approval or supplier quotation.

A calculator is not a quotation. A written quote should separately state the module and inverter model, mounting structure, protection equipment, taxes, net-metering work, warranty and completion timeline.

Next step: match the suggested capacity and budget against the written quote scope.

Check a solar quote →