Solar Pump Calculator India: Sizing & Cost Estimate

A solar water pump needs more panel capacity than its motor rating alone suggests, since panel output has to cover starting surges and cloudy-day dips. Enter your pump's HP rating to size the array, with an indicative note on PM-KUSUM subsidy support.

₹
kW

PM-KUSUM Solar Agricultural Pump Sizer

Dynamic Head, VFD Controller & PM-KUSUM Subsidy Simulator

%
1. Calculating motor HP to electrical kW demand & VFD sizing...
2. Computing dynamic head loss & daily discharge flow...
3. Sizing solar PV array with 1.3x oversizing for soft starting...
4. Applying 60% PM-KUSUM (Component B) central + state subsidy...
How this is calculated Rates updated: 18 Nov 2026
  • Pump motor rating in kW is the HP figure converted using the standard 0.746 kW per HP.
  • Recommended panel capacity oversizes the pump rating by 30% to cover motor starting current and generation dips on overcast days — a standard practice for standalone solar pump systems.
  • PM-KUSUM Component B/C typically covers 60% of a standalone solar pump's cost through combined central and state subsidy, leaving the farmer to fund the remaining share — actual percentages vary by state and component, so treat this as indicative only, not a quote.
  • This is a sizing estimate, not a substitute for a site survey — actual borewell yield, static and dynamic head, and pipe friction losses all affect the pump and panel size actually required.

Recommended Panel Capacity by Pump HP

Pump HP Panel capacity Farmer share (indicative)
1 HP 1.0 kW ₹16,293
3 HP 2.9 kW ₹48,878
5 HP 4.8 kW ₹81,463
7.5 HP 7.3 kW ₹1,22,195
10 HP 9.7 kW ₹1,62,926

Farmer share assumes a 60% combined central+state PM-KUSUM subsidy on a representative ₹42,000/kW system cost — confirm the actual subsidy percentage for your state and scheme component before budgeting.

Continue planning

PM Surya Ghar Subsidy Calculator

The rooftop subsidy scheme — different from PM-KUSUM.

→

Off-Grid Solar Calculator

Battery sizing for a standalone system.

→
Regional Solar Hubs

Explore Rooftop Solar by State & City

Calibrated with state Discom tariffs, local net-metering policies, and PM Surya Ghar subsidies across India.

Frequently asked questions

What is PM-KUSUM and how is it different from PM Surya Ghar?

PM-KUSUM (Pradhan Mantri Kisan Urja Suraksha evam Utthaan Mahabhiyan) is a separate central scheme specifically for solarising agricultural pumps and farm-level power, covering standalone solar pumps, solarised grid pumps, and farmer solar power plants. PM Surya Ghar is the residential rooftop subsidy scheme for homes — the two are not interchangeable.

Why does the panel capacity need to be larger than the pump's HP rating?

Pump motors draw a surge current on starting that can be several times the running current, and solar output varies through the day and drops on cloudy days — oversizing the array ensures the pump can start reliably and run for the needed hours even in less-than-ideal sun conditions.

Does head (depth to water) change how much panel capacity I need?

Head affects how hard the pump has to work to lift water to the surface, which is reflected in the pump's HP rating itself — very high heads typically require a higher-HP pump to begin with, which this calculator then sizes the array against.

How much does PM-KUSUM actually subsidise?

It varies by state and scheme component, but combined central and state subsidy commonly covers around 60% of a standalone solar pump's cost for individual farmers, with the remainder as farmer contribution, sometimes partly financed through a bank loan — check your state nodal agency for the exact current split.

Can I use a solar pump system for purposes other than irrigation?

PM-KUSUM standalone pump subsidies are specifically for agricultural use — using a subsidised connection for other purposes can affect scheme compliance, so check the terms with your state implementing agency before repurposing the system.

What solar panel capacity is needed for a 5 HP agricultural water pump under PM-KUSUM?

Under MNRE guidelines, a 5 HP agricultural pump requires approximately 4.8 kW to 5.0 kW of solar PV capacity to operate reliably across varying groundwater heads.

What total subsidy is available for solar agricultural pumps under PM-KUSUM?

PM-KUSUM Component B provides a 30% central subsidy combined with up to 30% state subsidy (totalling 60% subsidy). The farmer pays only 40% upfront or finances it via a bank loan.

Can farmers sell surplus solar electricity back to the grid under PM-KUSUM Component C?

Yes. Under Component C (solarisation of grid-connected pumps), farmers power their irrigation pumps during daytime and automatically export excess solar energy to the grid, earning ₹2.50 to ₹3.50 per unit.

Before you rely on this estimate

This calculator produces a planning range from your inputs and the assumptions shown on the page. It cannot replace a site visit, roof-shade survey, Discom approval or supplier quotation.

A calculator is not a quotation. A written quote should separately state the module and inverter model, mounting structure, protection equipment, taxes, net-metering work, warranty and completion timeline.

Next step: turn this result into a capacity, roof-space and budget decision.

Calculate system cost →