Warehouse Solar Calculator India: Cost & Savings

Warehouses combine two things solar likes: enormous flat roof area and a daytime-heavy operational load from lighting, material-handling equipment and refrigeration. Enter your monthly bill to size a system against that load.

Choose Calculation Basis
₹
Covered Sq Ft

Estimated monthly consumption: ~ units/month.

₹ /unit

Benchmark commercial rate: ₹/unit.

Daytime Usage & Grid Export Rates

Power used directly on-site saves the full commercial tariff rate.

₹ /unit

Surplus energy fed back to the DISCOM grid is credited at this rate.

kW

Commercial Solar Feasibility Engine

Institutional & Industrial Load Profiler

%
1. Commercial Load Profile & Monthly Tariff Indexed
2. Optimal Solar Plant Sizing Sized
3. Day-Use Self-Consumption Energy Yield Computed
4. Commercial Payback & Annual Savings Model Ready
How this is calculated Rates updated: 18 Nov 2026
  • Sized using the same commercial engine as our Commercial Solar ROI calculator, tuned with a warehouse-typical 60% self-consumption share reflecting daytime operations.
  • Savings reflect only the self-consumed share of generation at your commercial tariff — export value for any surplus depends on your state's net-metering terms and is not included here.
  • This is a sizing estimate against your electricity bill, not your available roof area — many warehouses have far more usable roof than their own load needs, worth a separate look at open-access or captive PPA options.

Warehouse-specific tips

  • Large flat roofs often support far more capacity than the connected load needs — consider open-access or a captive PPA structure if roof area outstrips your own consumption.
  • Confirm roof structural rating before committing to array weight, especially on older warehouse sheds not originally designed for rooftop load.
  • Cold-storage or refrigerated warehouse sections shift the load profile toward round-the-clock use, closer to a hospital's pattern than a standard warehouse.
  • Skylights and existing roof penetrations can reduce usable array area — get an actual site survey before finalising system size.

Payback by Monthly Bill

Monthly bill Recommended size Payback
₹50,000 53 kW 5.1 yrs
₹1,00,000 106 kW 5.1 yrs
₹2,00,000 211.5 kW 5.1 yrs

At a representative commercial tariff and warehouse self-consumption share. If your roof area exceeds what your own load needs, see the Big Solar Project Calculator for a PPA/captive analysis.

Continue planning

Big Solar Project Calculator

For roof area beyond your own load needs.

→

Commercial Solar ROI Calculator

Full payback and tax-benefit analysis.

→

Roof Load Calculator

Confirm your structure can take the array weight.

→
Regional Solar Hubs

Explore Rooftop Solar by State & City

Calibrated with state Discom tariffs, local net-metering policies, and PM Surya Ghar subsidies across India.

Frequently asked questions

Can a warehouse install more solar than its own electricity use needs?

Yes, if roof area and connection capacity allow — surplus generation can potentially be sold under a PPA to a third party or used for captive open-access supply above 1 MW in many states. See the Big Solar Project Calculator for that scenario.

Do older warehouse roofs need a structural check before solar?

Yes, strongly recommended — many older warehouse sheds were not designed with rooftop solar load in mind, and confirming the structure can safely carry the array weight is an essential first step before ordering equipment.

Does cold storage change the solar sizing approach?

Yes — refrigerated sections run continuously rather than only during operating hours, pushing the load profile closer to a 24/7 pattern like a hospital's, which changes both the recommended system size and the expected self-consumption share.

What is open access and is it relevant to a warehouse?

Open access lets large consumers buy power directly from a generator rather than the local utility, typically above certain capacity and voltage thresholds set by each state. It becomes relevant when a warehouse's roof area can support a system larger than a standard rooftop, behind-the-meter connection would use.

What structural checks are required before installing solar on metal shed warehouse roofs?

Verify that the steel trusses, purlins, and sheet gauge are engineered to carry the module dead load (~12 kg/m²) plus local IS 875 wind uplift forces before installation.

How does refrigerated cold-storage change warehouse solar economics?

Refrigerated warehouses run massive round-the-clock compressor loads. Solar replaces expensive daytime commercial tariffs with 100% self-consumption, achieving rapid 2.5-year paybacks.

Before you rely on this estimate

This calculator produces a planning range from your inputs and the assumptions shown on the page. It cannot replace a site visit, roof-shade survey, Discom approval or supplier quotation.

A calculator is not a quotation. A written quote should separately state the module and inverter model, mounting structure, protection equipment, taxes, net-metering work, warranty and completion timeline.

Next step: validate the hourly load profile, demand charges and export assumptions—not only the annual bill.

Check project feasibility →